|
|
 |
 |
|
|
|
Glacier
Based on the Aquarius basin range, this unit comes standard with a slab top made from polymarble and as an option: 10 mm toughened safety glass top or ceasar stone top.
The glass tops are made to order so can accomodate your special requirements as far as size and number of basin holes. The glass top is usually colour matched with the door inserts. The ceasar stone tops are also made to order (see page 14 for colour samples of polymarble, glass and ceasar stone tops). The polymarble, glass and ceasar stone tops are all made to suit our Aquarius range of basins.
These cabinet styles feature soft close drawer runners and anti slam door fittings, with a gloss finish. Standard colour is white. The door glass is toughened 6mm safety glass from our range of paint finishes (see page 14) or 3mm frosted glass inserts.
The standard legs are straight round bright chrome but can be changed to a kick (plinth) or other available legs (see page 14).
Click here for Glacier Specifications
|
| |
Top of page |
| Designer Timber
Timber has a melamine timber grain sides and kick with square ply-panel doors and drawer set, a solid timber splash and bow handles are standard.
Click here for Designer Timber Specifications
|
| |
Top of page |
| Executive Timber
Timber has melamine timber grain sides with solid panel front set, double arched doors and drawer set. Standard on curved steel legs (see page 14) for the other leg options or choose a melamine timber grain plinth).
Click here for Executive Timber Specifications
|
| |
Top of page |
|
T1000 Timber
T1000 sizes are subject to change without notification. If size is essential ring before ordering.
Click here for T1000 Specifications
|
| |
Top of page |
|
Alpino
All feature drawer only vanity cabinets in a limited number of sizes. The drawers feature soft close runner technology and are offset to the drawer fronts to allow a void in the centre to take the plumbing. Choose from 5 drawers including a double width bottom drawer where the waste pipe is wall mounted or 6 drawers with a centre void to the base of the cabinet. Standard are straight round chrome legs but you can select other available legs or request a plinth. Both the Alpino and Caprice come in a gloss finish.
Alpino Vanitiy comes standard with a polymarble slab top in your choice of colours or increase available colours with the optionsal 10mm toughened glass or ceasar stone top with a hole for an Aquarius basin.
Click here for Alpino Specifications
|
| |
Top of page |
|
Caprice
Caprice Vanity introduces the Euro Top. Made in Australia from polymarble the Euro Tops design is modern with a shallow curved basin.
Click here for Caprice Specifications
|
| |
Top of page |
| Lilly
Using the Aquarius basin range and polymarble slab tops.
The Lilly range is a gloss front and has no drawers. Open shelves to display towels so you can change the colour of your bathroom as the seasons change. Standard are the polyceramic slab top cast in moulds in sizes 600 & 900 with one basin hole and a 1200 with 2 basin holes.
Click here for Lilly Specifications
|
| |
Top of page |
|
Jeannie
The Jeannie is available in white melamine, melamine timber grain or gloss front with plinth or polymarble slab top standard, and a basin from our Aquarius range.
Click here for Jeannie Specifications
|
| |
Top of page |
|
Barcelona
Are built around the 500 deep polymarble Euro top. European design made in Australia. both feature a bigger and deeper bottom drawer. Barcelona is a gloss vanity with pencil round edges on doors and drawers and glass door inserts on a kick (plinth).
Click here for Barcelona Specifications
|
| |
Top of page |
|
Milan
Milan is a gloss vanity with bevel edges on doors and drawers on a kick (plinth).
Click here for Milan Specifications
|
| |
Top of page |
|
Bribie
Are built around the traditional oval vanity tops including the vogue basin with offset taps and the semi recessed styles.
Bribie vanities have an uncluttered flat face gloss front finish with small radius pencil round edges. Standard handles are chrome or gold bow style.
Click here for Bribie Specifications
|
| |
Top of page |
|
Swan
Swan vanities also have a gloss front with a 32mm wide tudor style arch in the centre of the doors and the drawer set.
Click here for Swan Specifications
|
| |
Top of page |
|
The lismore vanity is a square patterned door with ceramic knobs and chrome or gold backplates. This unit comes in a Durashield (matt) front finish, featuring a 32mm routed square groove design. The lismore comes with a shelf, metal hinges and quality metal drawer runners.
Click here for Lismore Specifications
|
| |
Top of page |
|
Colo
The Colo vanity is a pencil edge Durashield vanity. This comes standard with bright chrome t-bar handles, other handles are available (See page 14 of the brochure).
The Colo comes with our polymarble top which is Australian made and manufactured in our Queensland factory.
Click here for Colo Specifications
|
|
Top of page |
|
Trades Gloss
The Trades Gloss is a gloss melamine finish vanity available in white only. Featuring brlight chrome finger pull handles this unit is contemporary at a budget price.
The Trades Gloss comes standard with the bright finger pull handles, although other handles are available (See page 14 of the brochure).
Click here for Trades Gloss Specifications
|
| |
Top of page |
|
Grace
The Grace vanity unit is a timber melamine grain available in White, Beech, Wenge, Jarrah, Blackwood or Ivory (See page 14 of the brochure).
The Grace comes standard on curved legs, other legs are available (see page 14 of the brochure).
This unit is also available on a plinthas an option.
Click here for Grace Specifications
|
| |
Top of page |
|
Trades
Trades vanity unit is a plain door vanity in a melamine finish. Comes standard with ceramic knobs and on a kick (plinth).
The Trades can be made with many options to dress up your bathroom including: chrome or gold backplates, different handles, on legs instead of a plinth, or wall hung.
The Trades also offers many different colours as an option: Ivory, Beech, Wenge, Jarrah & Blackwood.
Click here for Trades Specifications
|
| |
Top of page |
|
Alice
The Alice vanity is a step up from the Trades which is trimmed witha 4mm groove forming a square pattern in the doors and drawers, (which can be painted ivory).
Like the Trades the Alice can be made with many options to dress up your bathroom including: chrome or gold backplates, different handles, on legs instead of a plinth, or wall hung.
Click here for Alice Specifications
|
| |
Top of page |
|
Shaving Cabinets
Showerama shaving cabinets are 720h x 293w x 155d and are available in most door styles and finishes to match your vanity unit. They can also come with left or right hand side hinges.
|
| |
Top of page |
|
Mirrors
Click here for Mirror Specifications
|
| |
Top of page |
Mirror Cabinets
Mirrored Cabinets are available in Durashield, Gloss and Timber in the following sizes:720h x 600w x 155d, 720h x 760w x 155d, 720h x 900w x 155d, 720h x 1200w x 155d
Click here for Mirror Cabinet Specifications
|
| |
Top of page |
|
Mirror Combo Cabinets
Mirrored Combo Cabinets are available in Durashield, Gloss and Timber in the following sizes:
720h x 900w, 720h x 1200w
Click here for Mirror Combo Cabinet Specifications
|
| |
Top of page |
|
|
| |
Top of page |
|
Towel Towers
Towel Towers are available in: Gloss - White and Ivory, Melamine - White, Beech, Wenge, Jarrah and Blackwood.
|
| |
Top of page |
|
Towel Tidy
|
|
Top of page |
